- Другие компании Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Experimental Study and Computer Modeling of the Triple Point of Argon System
The triple point of argon is a defined fixed point in ITS-90 for calibration of standard platinum resistance thermometers (SPRTs). A new triple point of argon system with multiple re-entrant wells was developed. This system was tested to evaluate the duration and quality of the argon triple-point temperature plateau. The testing results showed that the plateau can be as long as 100 hours with the temperature change less than 0.05 mK. The re-entrant wells’ uniformity testing showed that the temperature is consistent among the multiple re-entrant wells. Uncertainty analysis shows that the combined uncertainty of the argon system is 0.25 mK (k = 2). In order to study the heat transfer process and the influence on the thermal equilibrium of the argon system during the realization of the triple-point of argon plateau, finite element analysis (FEA) modeling was carried out to simulate the thermal conductivity, convection, and radiation inside the argon system. The FEA simulation results are described and discussed in this paper. According to the simulations results, suggestions are provided in order to quickly reach thermal equilibrium and obtain a long, stable plateau in the triple point of argon system.
- Главная
- Продукты
- новые продукты
- Калибраторы электрических
- ВЧ-калибровка
- Сбор данных и оборудование для испытаний
- Температурная калибровка
- калибровка влажности
- Калибраторы давления
- Поршневые манометры
- Контроллер/Калибраторы
- Мониторы давления
- Грузопоршневые манометры
- Ручные калибраторы и мониторы
- Handheld Pressure Calibrators
- Калибровка данных для воздуха
- Мониторы окружающей среды
- Вспомогательные принадлежности для калибровки давления
- Заказные системы калибровки давления
- Программное обеспечение для калибровки давления
- Калибраторы газовых расходомеров
- Калибраторы процессов
- Программное обеспечение для калибровки
- Сервис/Поддержка
- Все приборы для калибровки
- Переносные измерительные приборы
- Покупателям
- Новости
- Обучения/Мероприятия
- Литературы/Oбразования
- Поддержка/Сервис
- On-line Service RMA
- Программы обслуживания
- База знаний
- Аккредитация
- Авторизованные центры обслуживания
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Руководства по продукту (руководства пользователя)
- Паспорта безопасности (SDS)
- Safety, Service, and Product Notices
- Загрузка программного обеспечения
- О компании