- Другие компании Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
Traceability and Quality Control in a Radiation Thermometry Laboratory (NCSLI Measure reprint)
This article, by Frank Liebmann and Tom Kolat, was published in the March 2012 issue of NCSLI Measure magazine.
Abstract: In radiation thermometry, a number of steps have been taken to improve calibration quality at temperatures below 1000 °C. These steps involve work done by national metrology institutes and standards bodies. The Fluke Infrared Calibration Laboratory in American Fork, Utah has benefitted from this progress and has established its own radiation thermometry program. The calibration range of this laboratory is -15 °C to 500 °C. This program involves calibrating radiometric transfer standards (with pyroelectric detectors) that, in turn, are used to calibrate flat-plate radiation sources, sometimes referred to as blackbodies. The transfer standards are calibrated by a sequence of blackbody cavity radiation sources that cover the entire temperature range of the laboratory. The radiometric transfer takes place between the cavity sources and the flat-plate sources. The intended use of the flat-plate sources is infrared thermometer calibration. Both the transfer standard calibrations and the flat-plate calibrations are accredited by the National Voluntary Accreditation Program (NVLAP). This paper discusses the traceability involved in this radiometric calibration program. It also discusses numerous quality control measures that have been taken to improve and assure measurement accuracy for both calibrations.
- Главная
- Продукты
- новые продукты
- Калибраторы электрических
- ВЧ-калибровка
- Сбор данных и оборудование для испытаний
- Температурная калибровка
- калибровка влажности
- Калибраторы давления
- Поршневые манометры
- Контроллер/Калибраторы
- Мониторы давления
- Грузопоршневые манометры
- Ручные калибраторы и мониторы
- Handheld Pressure Calibrators
- Калибровка данных для воздуха
- Мониторы окружающей среды
- Вспомогательные принадлежности для калибровки давления
- Заказные системы калибровки давления
- Программное обеспечение для калибровки давления
- Калибраторы газовых расходомеров
- Калибраторы процессов
- Программное обеспечение для калибровки
- Сервис/Поддержка
- Все приборы для калибровки
- Переносные измерительные приборы
- Покупателям
- Новости
- Обучения/Мероприятия
- Литературы/Oбразования
- Поддержка/Сервис
- On-line Service RMA
- Программы обслуживания
- База знаний
- Аккредитация
- Авторизованные центры обслуживания
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Руководства по продукту (руководства пользователя)
- Паспорта безопасности (SDS)
- Safety, Service, and Product Notices
- Загрузка программного обеспечения
- О компании