- Другие компании Fluke:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
How to clean an infrared calibrator target
The best/proper method to clean your infrared calibrator target
The black body paint on the target of your infrared calibrator is very delicate. To remove the dust or debris from the paint, the only thing you can do is use compressed dry air. The dry air must have no oil and no water in the line or hose. Use a filter on an air hose to remove the oil and an air dryer to remove the water. Have the compressed air set to about 100 psi.
Some items like compressed air in a can will contain a propellant that will spray out. Be careful with these products.
Test the air against a piece of paper or cardboard. If you can see any spots of any liquid, do not use. Try a different source.
DO’s and DON’T’s
- Do not use any chemical on the black body target.
- Do not attempt to repaint the target.
- Do not wipe the target
- Do use the target cover when not using the target
- Do use the target cover for transporting the unit
If the IR target gets contaminated
If the target does get contaminated, the block will need to be replaced. It cannot be repainted, touched up, or resurfaced. The painting process is very delicate. During the process, we sandblast the surface, put it through a chemical wash, rinse, dry for several hours, paint, and then bake the paint for 4 hours.
Recommended Products
4180, 4181 Precision Infrared Calibrators
9132 and 9133 Portable Infrared Calibrators
Recommended Resources
Infrared Temperature Calibration 101 - application note
Infrared Temperature Calibration 101 - webinar
Speak with a calibration expert
- Главная
- Продукты
- новые продукты
- Калибраторы электрических
- ВЧ-калибровка
- Сбор данных и оборудование для испытаний
- Температурная калибровка
- калибровка влажности
- Калибраторы давления
- Поршневые манометры
- Контроллер/Калибраторы
- Мониторы давления
- Грузопоршневые манометры
- Ручные калибраторы и мониторы
- Handheld Pressure Calibrators
- Калибровка данных для воздуха
- Мониторы окружающей среды
- Вспомогательные принадлежности для калибровки давления
- Заказные системы калибровки давления
- Программное обеспечение для калибровки давления
- Калибраторы газовых расходомеров
- Калибраторы процессов
- Программное обеспечение для калибровки
- Сервис/Поддержка
- Все приборы для калибровки
- Переносные измерительные приборы
- Покупателям
- Новости
- Обучения/Мероприятия
- Литературы/Oбразования
- Поддержка/Сервис
- On-line Service RMA
- Программы обслуживания
- База знаний
- Аккредитация
- Авторизованные центры обслуживания
- Calibration Certificates
- Community Forum
- My MET/SUPPORT
- Руководства по продукту (руководства пользователя)
- Паспорта безопасности (SDS)
- Safety, Service, and Product Notices
- Загрузка программного обеспечения
- О компании